On a first viewing, a restaurant unit is usually at its best. The doors are open, the dining room is empty, and nobody is trying to carry a rack of dirty glasses past a queue of delivery riders. It is easy to picture where the tables will go. The more valuable exercise is to picture the room at 8:15 on a busy Friday evening. Where does a hot plate land? Where does a rider wait? Can the dishwasher open while someone is working behind the counter?

If you are choosing a restaurant space in Dubai, take three things to the viewing: your proposed menu, a list of the equipment you expect to use, and a drawing of the unit. Use them to check whether the kitchen can be serviced, whether customers and staff can move comfortably, and how much of your budget will go into making the premises usable. Then ask the landlord and your project team to confirm the expensive assumptions in writing.

At Bait Al Ebdaa, our published starting rates are AED 30 per sq ft for restaurant interior design and AED 450 per sq ft for restaurant fit-out, excluding VAT. These figures cover different scopes. Understanding what your particular unit needs is what makes either rate useful.

1. Take the menu to the viewing

Imagine two operators visiting the same corner unit. One plans to sell coffee, sandwiches assembled to order and pastries delivered each morning. The other wants a grill restaurant with a busy evening takeaway trade. Both like the frontage. They need very different things from the space behind it.

For the café, a revealing question is where the milk travels. Trace its journey from delivery to cold storage, from the fridge to the barista, and from the empty container to the waste area. If every refill takes the barista across the customer queue, the counter needs another layout. An attractive espresso machine in the front window will do little to solve the morning bottleneck.

For the grill restaurant, start with the hot line. Ask where the proposed equipment will sit, how the extraction route would work, and who can confirm that the building permits the installation you have in mind. Before paying for detailed visuals, give the kitchen specialist the equipment list and ask which items need site investigation.

A useful one-page brief names your busiest meal period, the dishes that create the most preparation, the items cooked to order, and what proportion of orders you expect guests to collect or have delivered. Mark estimates as estimates. A designer can test a layout against “two riders may arrive while six guests are ordering.” “We need a modern, efficient restaurant” gives them much less to work with.

2. Find out what the landlord is actually handing over

A former restaurant can look like the easiest option. There may already be a counter, a kitchen extract grille and a wash-up area. On your drawing, label each of these existing, verified for reuse or to be investigated. An installation earns the second label only when the relevant person has checked it against your proposed operation.

Ask for the latest available drawings, the landlord’s fit-out manual, details of services provided to the unit, and any records available for equipment or installations included in the lease. During the viewing, establish which items belong to the landlord, which belong to the outgoing tenant, and which will still be there on handover day. A cold room included in your budget has little value if the previous operator is taking it away.

  • Kitchen extract. Where does the duct lead, can the route serve your equipment, and who can authorise changes?
  • Power. What capacity is available at the unit when refrigeration, cooking and dining equipment are running together?
  • Drainage. Where are the existing points and what would moving the wash-up area involve?
  • Ceiling access. How will the team reach equipment, valves and filters after the ceiling is closed?
  • Service entrance. Can your tenancy use it for deliveries, servicing and waste collection, and at what times?

Photograph the service entrance as carefully as the shopfront. A beautiful unit reached through a narrow service corridor can still work, but the dimensions may change the refrigeration equipment you can bring in. Discover that before placing an order.

3. Draw one busy service from start to finish

Take a printed floor plan and use four coloured lines. Trace a guest arriving and leaving, a server carrying food and returning used plates, a delivery rider collecting an order, and a staff member moving supplies or waste. Where two lines cross, ask what happens if both people arrive at the same time.

Some crossings are harmless. A server passing the host stand occasionally may be perfectly workable. A rider standing in front of the only route out of the dining area every time the takeaway shelf is full deserves a different solution.

Try a specific scenario. A family of four arrives with a pushchair. The host is helping them when a rider asks for an order number. A server is carrying two hot dishes from the pass, while another guest gets up to pay. On the plan, point to where each person can stand. If the answer depends on somebody stepping aside, moving a chair or shifting a shopping bag, record it. You have just found a design issue that an empty-room rendering would probably miss.

Run the same exercise at closing time. Where do chairs go during cleaning? Can staff reach the floor under fixed benches? Can a technician get to the refrigerator without dismantling a counter? These questions will still matter long after opening night.

4. Count seats with the chairs pulled out

An early seating plan often looks generous because the chairs are neatly tucked under the tables. Customers sit farther back. Bags appear on the floor. Someone needs to leave the table while the next table is being served. Ask for a second version of the plan showing seats in use.

Look closely at the least attractive seats. Would a couple want the table beside the collection shelf? Can the person at the end of the banquette leave without asking two others to stand? Is there a comfortable route from the entrance to an appropriate table for a guest using a mobility aid? Have the design team check the applicable accessibility requirements for the premises. A route that looks passable on a small printout deserves a measured check.

If two layouts are competing, test the difficult corner at full scale. Tape the counter edge and table positions on the floor. Put real chairs in place, ask someone to sit down, and walk past carrying a tray. Sometimes moving one table makes an entire row easier to serve. Sometimes the smaller table count gives you the room you actually want customers to return to.

5. Separate design fees, fit-out work and opening costs

For an illustrative 1,200 sq ft Dubai restaurant, the design starting rate gives a figure of AED 36,000. The restaurant fit-out starting rate for the same area gives AED 540,000. Both figures are before VAT and come from Bait Al Ebdaa’s published prices. Ask whether the fit-out proposal includes any design work before adding the figures together.

Before comparing proposals, ask each bidder to identify equipment, loose furniture, authority fees, landlord-related costs, specialist kitchen works and VAT separately. An omitted item and an included item can both disappear inside the words “full package.”

Consider a quotation with a single line for a “complete service counter.” One bidder may be pricing the joinery, countertop and installation. Another may also have allowed for the sink, refrigeration, wiring and connections. Send both the same marked drawing and ask them to label each item as included, by the owner or separately quoted. That gives you a practical comparison and identifies purchases that still need someone’s attention.

6. Confirm the approval route for the particular unit

Dubai Municipality lists a layout assessment service for food establishment licensing and publishes requirements organised by activity. Give the person coordinating your application a description of what the business will actually do. A trading name or a mood board alone will not explain whether food is prepared on site, what is cooked, or how orders are served. Ask which guidance applies to that operation. Dubai Municipality food establishment services.

The building and its jurisdiction matter too. For premises under Dubai Development Authority jurisdiction, DDA publishes a fit-out permit process, drawing requirements and a completion service. Its drawing list includes food-and-beverage-specific material. Ask the project team to identify the applicable route for your address and scope before using another restaurant’s approval checklist as a programme. DDA fit-out permit guidance.

Ask for a short approvals schedule with a named person beside each item. Who obtains the landlord’s information? Who prepares the drawings? Who submits them? Who responds if a revision is requested? Alongside each item, record the decision it affects. If the kitchen layout is still being assessed, for example, ask the designer which fabrication orders should wait.

7. Spend on details the team will use every day

Once the layout works, start finish selections with the host desk, service counter, tables and banquettes. Each has a job to do throughout the shift. Give the fabricator a list of the things that need to fit before approving the appearance.

At a host desk, that might mean a booking tablet, charging cable, menus and somewhere discreet for personal belongings. At a takeaway counter, it may mean bags in two sizes, labels, napkins and an obvious place for completed orders. Ask a member of the operating team to arrange those objects on a mock counter. The exercise often reveals that the most-used shelf is too low or that a cupboard door opens directly into someone’s working position.

Test finishes with the products and lighting you intend to use. Take a tabletop sample into the room, put a printed menu on it, and read the smallest text under the proposed evening light. Ask the supplier for maintenance instructions and check how exposed edges can be repaired. For an upholstered bench, establish how an individual panel can be replaced if it is damaged.

8. Make the lease decision with the unknowns in front of you

Before committing to a preferred unit, bring the operator, designer and relevant technical specialists together for one review. Give them the same plan. Ask each person to name the one assumption most likely to force a redesign or a significant extra cost.

Suppose the design works only if the kitchen can occupy the rear of the unit. The operator likes the customer flow, and the landlord has said that the premises previously traded as a restaurant. The next useful piece of information is written confirmation of the service route and technical suitability for the proposed kitchen. Another rendering of the dining room will not resolve that decision.

End the review with a short list of open points, the person responsible for each, and the evidence that would close it. You should be able to explain to a business partner what works about the unit, which costs you understand, and what you are still relying on someone to confirm.

Frequently Asked Questions

What should I check first when viewing a restaurant unit in Dubai?

Check whether the unit can support the menu and equipment you intend to operate. Walk the delivery and waste routes, locate the kitchen services, and request the landlord’s drawings. Take photos and record which technical details require specialist confirmation. This gives the first design meeting a clear purpose.

How much does restaurant interior design cost in Dubai?

Bait Al Ebdaa’s restaurant interior design service starts from AED 30 per sq ft, excluding VAT. At that starting rate, a 1,200 sq ft unit gives an indicative design figure of AED 36,000. Ask for a written list of drawings, revisions and coordination services included in your quotation.

Is it cheaper to lease a unit that was already a restaurant?

It can be if usable installations remain and suit your operation. Compare the cost of keeping them with the cost of testing, adapting or removing them. An existing kitchen in the wrong place for your menu and service model can be an expensive starting point.

What should I bring to a restaurant design consultation?

Bring the unit plan, site photos, proposed menu, equipment list, preferred service style, budget range and landlord documents already available. Include a short description of your busiest expected shift. If you are comparing two units, bring both plans and ask which differences are likely to affect feasibility and cost.

Planning a restaurant in Dubai? Share your shortlisted unit’s floor plan and proposed menu with Bait Al Ebdaa. Explore restaurant interior design in Dubai or discuss restaurant fit-out in Dubai.