Open the cupboard under your sink before choosing a new door colour. In one kitchen, the doors may look tired while the shelves are level, the drawers run smoothly and the layout works beautifully. In another, a smart-looking door hides a swollen base and a hinge that pulls loose whenever someone reaches for the bin. Those kitchens call for different work, even if their photographs look much the same.

Keep the boxes and consider refacing when the cabinets are sound and you like the layout. Price selective replacement when damage is confined to one unit. Get a new layout and a replacement quote when several boxes are failing or the way you cook requires a different arrangement. The first decision is which parts of your kitchen have earned their place. The finish comes afterwards.

What will actually come out of the kitchen?

Ask any company quoting a kitchen makeover to answer that question in writing. With wrapping, the existing door usually stays and an installer applies decorative film to the agreed surfaces. With door replacement, the door and drawer fronts come off and new ones are fitted. With refacing, the boxes stay while the visible fronts and, depending on the quotation, exposed frames and panels receive a new finish. With cabinet replacement, the boxes themselves come out.

The distinctions matter most at the edges. Imagine changing dark brown doors to light oak. The island end faces the dining table; a strip of the old finish is visible next to the fridge; the plinth runs beneath the whole kitchen. A quote for twelve door fronts may leave all three areas brown. Ask the supplier to point to every surface that will change while standing in the room with you. Photograph the ones you agree to keep.

A useful starting point is The Home Depot’s refacing decision guide, which considers the condition of the boxes and the usefulness of the existing layout. Its guidance helps frame the inspection. For a Dubai project, use local measurements and quotations for the financial decision.

Kitchen one: worn doors, good cabinets

Consider a hypothetical apartment kitchen with glossy cream doors. The owner wants a quieter finish, likes the continuous preparation space beside the hob and can reach the everyday plates from the dishwasher. The door below the coffee machine is scuffed, but the shelves stay level with dishes on them. Nothing about that brief yet points to rebuilding the kitchen.

Try the three doors you use most, including the awkward one in the corner. Open each to its normal working position. Look at the hinge fixing in the side of the cabinet while someone gently opens and closes the door. A crooked front can have several causes. Ask the surveyor to distinguish an adjustment, a worn hinge and a fixing that has lost its hold in the board. Those are different items on a quotation.

If the cabinets pass inspection, ask to compare a wrapped sample door with a newly manufactured front. Hold each beside your existing countertop in the actual room. Look at the reverse, the corners and the edge you will touch when you open it. If the handles are moving, find out what will happen to the old holes on both sides. A colour swatch can help you choose a shade; a finished sample tells you what you will be buying.

Kitchen two: a swollen sink cabinet

The door beneath the sink catches the frame. Inside, the cabinet floor rises near the waste pipe. The other doors still close properly. The temptation is to order matching new fronts throughout and ask the installer to straighten this one. First find out whether the movement starts in the door or in the cabinet supporting it.

Formica’s laminate care guidance explains that water entering seams can swell the material below the surface. That is a reason to examine a raised joint closely. It is not enough evidence to diagnose a leak from a photo. Have an active leak investigated and check the base, sides, adjacent units and attachment points before deciding what a new finish could achieve.

Request one line for resolving the cause and another for the affected joinery. If a single box needs replacing, ask how the team would remove it under a continuous countertop. Where are the sink connections? What supports the worktop while the box is out? Who is responsible for disconnecting and reinstating anything that must move? Until someone has inspected those details, keeping the countertop is an assumption worth writing down.

A selective repair is especially worth pricing where identical replacement doors are unavailable. You might keep the sound upper cabinets and deliberately choose a different finish for all the lower fronts. Ask for a sample against the old doors. The aim is a combination you would have chosen anyway, rather than a near match that becomes obvious in daylight.

Kitchen three: the layout is the problem

Imagine a kitchen where the dishwasher opens across the cutlery drawer and a new fridge projects into the route to the balcony. Most of the cabinets are in excellent condition. New fronts would improve the view from the living room, but the person unloading the dishwasher would make exactly the same inconvenient journey tomorrow.

Spend one ordinary evening recording those movements. Where do you put a hot tray? Which drawer can a second person open while someone is preparing food? Is the most useful worktop permanently occupied by small appliances because the only convenient sockets are there? Give the designer three specific conflicts to solve. A request to “make it more practical” leaves too much room for interpretation.

Compare a drawing that retains most of the boxes with one that changes them. Perhaps an internal pull-out makes one existing cabinet useful again. Perhaps the proposed appliance requires a wider opening and moving one box affects its neighbours. Ask to see doors, drawers and appliances drawn open. A replacement layout earns its cost when you can point to the daily problem it solves.

Check door and hinge compatibility before ordering a full set

Two doors of the same width and height are not automatically interchangeable. The opening direction, hinge position, handle clearance and relationship to the adjacent front all matter to the finished result. If your kitchen came as a system, photograph its label and the hinges. If it was made to measure, give the surveyor access to the actual cabinets rather than relying on one loose door.

There is a concrete manufacturer example. IKEA’s guidance for older kitchens distinguishes its METOD and FAKTUM systems and explains that current fronts do not fit the older system directly. That illustrates why identifying the system matters; it does not establish the specification or local availability of a part for your particular kitchen.

For a custom order, request a trial on the most difficult opening. Choose the corner against the wall or the tall front beside the fridge rather than the easiest middle cabinet. Open the door with the proposed handle attached, open the drawer beside it, and check the meeting edges when both close. Agree how an alignment issue discovered during final fitting will be resolved before the rest of the fronts go into production.

What Dubai wrapping quotations can teach you

Dubai providers describe their offers in different ways. Centerstone’s kitchen wrapping guide explains how the number of panels, exposed edges and work surfaces affects a project estimate. Epic Wraps’ cost guide highlights preparation, film specification, edge treatment and written warranty terms. These are useful questions for a buyer comparing surface work. Neither provider’s wrapping estimate prices a new cabinet box for your kitchen.

Give each bidder the same inventory. For an illustrative kitchen, that might be ten hinged doors, four drawer fronts, two exposed ends, one island back and a continuous plinth. Photograph the working side and the dining side of the island. A contractor viewing a single photograph taken from the kitchen doorway may never see its largest exposed panel.

Next, write down what happens to the items people often assume are included: handles, hinges, drawer runners, internal faces, removal of old material, transport, fitting, disposal and VAT. Ask who supplies each item and who fits it. When a line is blank, write “awaiting confirmation.” Treating a blank as a zero price makes the shortest quote look artificially attractive.

A four-metre budget example for new cabinets

Bait Al Ebdaa’s published starting rate for new laminate kitchen joinery is AED 2,400 per linear metre. At that rate, an illustrative four-metre run starts at AED 9,600 before VAT. The figure prices new joinery at the published starting level. Obtain a measured specification for what your four metres contain, and ask for separate treatment of appliances, worktops and any associated works. The Dubai kitchen cabinet cost guide explains finish levels and how different layouts affect the calculation.

Now imagine receiving a second quote to wrap ten existing doors. Dividing that quote by four metres will produce a number, but it will not make the two proposals comparable. One keeps the boxes, door cores and internal layout; the other provides new joinery. First compare what each option fixes. Then decide whether the additional work in the replacement proposal is valuable to you.

Use a simple acceptance test. Write one sentence beginning “When the work is finished, I should be able to…” For one owner the ending is “look across the living room and see matching cabinet fronts and island panels.” For another it is “open the dishwasher and put the plates straight into a wide drawer.” The cheaper scope may satisfy the first owner completely and do nothing for the second.

What to settle at the survey and on handover

Mark the kitchen drawing with three categories: keep, change and inspect. Attach the marked drawing to the quote, along with the agreed sample, finish reference and hardware schedule. If two adults use the kitchen differently, let each one check the plan. A raised handle that looks good to one person might catch the other person’s clothing at the narrow entrance every morning.

Ask the installer to describe the sequence. On which days will the sink, drawers or appliances be unavailable? Where will the removed fronts be stored? Can the kitchen be used between visits? In a Dubai apartment, check the building’s actual arrangements for contractor access, deliveries and waste removal with management. Those answers are more useful for planning meals and time off work than a general promise of a quick makeover.

At handover, inspect the kitchen at standing height and from the adjacent seating area. Run every drawer, open neighbouring doors together and check the panels visible beyond the last cabinet. Keep the care instructions for the material actually installed and the written terms for the agreed work. These give you a record of what to clean it with and whom to contact if an edge or fitting later needs attention.

Frequently Asked Questions

Can I reface cabinets and keep my existing worktop?

That may be feasible when the supporting boxes remain in place. If a damaged unit must come out, ask the fitter to inspect how the worktop and sink are supported and how any connections will be handled. Get the proposed method and exclusions in writing before ordering fronts.

Should I wrap a door that has already started swelling?

Have the cause and condition of the underlying board assessed first. A decorative finish cannot restore material that no longer holds a fixing securely. Ask for the affected door or box to be priced separately so you can see whether the rest of the kitchen can stay.

What photographs should I send for an initial quote?

Send one wide view of each wall, both sides of an island, the sink base, a typical hinge and close-ups of damaged edges. Add the door and drawer count. Include a picture with the corner doors and dishwasher open if they interfere with one another. A site measurement should follow before manufacture.

When does full replacement make sense?

Consider replacement when the underlying boxes are widely damaged or when retaining them prevents the storage, appliance arrangement or clearances you need. If only one cabinet is affected, ask for a selective option alongside the replacement proposal. For a new layout or made-to-measure joinery, share your plan with our Dubai kitchen design team and identify the parts you hope to retain.